Automatic Edge Banding Machine BJD-F770J

Short Description:

It is suitable for straight edge sealing of solid wood board, fiberboard, particleboard and other board workpieces. The edge sealing materials can be solid wood strip, PVC, melamine, thin wood skin, etc.


Product Detail

FAQ

Product Tags

BJD-F770J Automatic Edge Banding Machine

It is suitable for straight edge sealing of solid wood board, fiberboard, particleboard and other board workpieces. The edge sealing materials can be solid wood strip, PVC, melamine, thin wood skin, etc.

● Adopt imported motor and high-quality electrical components.

● High precision and high efficiency of edge banding machine.

● The end trimming device adopts the structure of automatic tracking of profiling and high-frequency high-speed motor fast cutting through precise linear guide rail movement, so as to ensure the flatness and smoothness of the cutting section.

The fine trimming device is used to trim the excess edge banding materials of the upper and lower parts of the edge banding belt of the processed plate. The structure of automatic tracking of profiling and high-frequency high-speed motor is adopted to ensure the flatness and smoothness of the upper and lower parts of the edge trimming plate.

Model

BJD-F770J

Edge band thickness

0.4-3mm

Sheet workpiece thickness

10-60mm

Conveyor speed

15m/20m/23m/min

Minimum plate width

80mm

Minimum plate length (without pre-milling)

120mm

Minimum plate length

300mm

Plate spacing

600-800mm

Total power

18KW

Voltage

380V(±5%)

working pressure

0.6Mpa

Dimensions

7120*920*1725mm

Control System

Delta PLC

Cylinder, solenoid valve

Yadeke brand

Inverter

Highmont

Pressure regulating valve

Imported precision SMC

Electrical device

Tracy

Features:

7
图片1
x
c
11
b
26
m
d

 The machine control interface design is user-friendly, fool-proof operation, and the operator can get on the job after simple training, without the need for technical workers. The machine moves quickly and efficiently, helping you achieve a leap in productivity.

 

 

 

The pre-milling device re-modifies the burr chipping or non-vertical phenomenon of the board to achieve a better edge sealing effect, making the edge band and the board fit more closely, and the integrity and aesthetics are better.

 

 

 

Small round pressing: the pressing force is uniform, the workpiece runs smoothly, the board surface is clean, and the edge sealing quality is good.

 

 

 

 

Adhesive coating and bonding device makes the edge banding plate and edge banding material uniformly glued through a special structure to ensure stronger adhesion.

 

 

 

 

The end trimming device moves through precise linear guide rails, adopts automatic tracking of the mold and high-frequency high-speed motor fast cutting to ensure the cut surface is neat and smooth.

 

 

 

 

Double pneumatic fine trimming device is used to remove the excess edge sealing material on the upper and lower parts of the edge band of the board. It adopts the structure of automatic tracking and high-frequency high-speed motor to ensure the smoothness of the upper and lower parts of the board

 

 

 

Rounded corner repair device under profile tracking can make the end face of the board more smooth and beautiful

 

 

 

 

 

The double pneumatic edge scraping device is used to eliminate the ripple marks caused by the non-linear motion of the trimming process, so that the upper and lower parts of the sapwood are smoother and cleaner.

 

 

 

 

The pneumatic polishing device cleans the processed plate with a cotton polishing wheel, and smooths the edge sealing end surface by polishing.


  • Previous:
  • Next: