4-Axis CNC cutting Machine BJD-K61-4D

Short Description:

Suitable for panel furniture, cabinet doors, office furniture, custom furniture, door industry and other industries. Machinable plate: multilayer board, particle board, ecological board, density board, wave board etc.

Product Detail


Product Tags

4-Axis CNC cutting machine BJD-K61-4D

Scope of application: 

1. An intelligent and economical CNC equipment. Mature and stable, has won widespread trust and praise in the market.

2.The main shaft bearings are high-precision ceramic bearings with low noise and long life. Imported linear guide rails and imported ball screws with high bearing capacity and accurate cutting.

3. All-steel structure adopts the table of heavy-duty machine tool and gantry beam structure, and the structure is stable.

4. It is safe and intelligent, and has intelligent processing cross-border protection to prevent mechanical collision caused by the design layout exceeding the processing format. It has functions such as resuming carving at breakpoints, restoring power failure, and predicting processing time. It is truly user-friendly design. The perfect automatic oil lubrication system greatly prolongs the service life of the machine.

5. It has a roller feeding function to ensure that one person can easily complete the feeding operation, automatic knife setting function, table dust removal function, cleaning table auxiliary function (air gun), layered cutting without step function, and other industry-leading functions.

6. The vacuum adsorption is strong and powerful, which can perfectly realize the special-shaped cutting and small block cutting.





Machinable sheet size


Maximum running speed


Feed height


transfer method

X, Y high precision rack and pinion drive Z axis screw

Spindle power

6KW * 4

Spindle speed

0-18000r / min

Other power (excluding spindle)

3.9KW (excluding vacuum cleaner and vacuum pump)

Operating Voltage

380V ± 5% 50HZ1 ± 1%

Carving instructions

G code / code: (nc), mmg, Plt, eng, dxf

Control System


Clamping method

Vacuum adsorption


Company Advantages:





The equipment and machine tools use welding industrial robots for welding to improve the welding quality and reflect the welding quality in a numerical mode.







Stress aging instrument: Apply additional dynamic stress to the workpiece in the form of resonance. When the additional dynamic stress and the residual stress are superimposed and reach the yield limit of the material, the workpiece undergoes micro or macro plastic deformation, thereby reducing and homogenizing the residual inside the workpiece Stress and stabilize its dimensional accuracy.







All machine beds are processed by large high-precision pentahedron machining centers (roughing, finishing, drilling, tapping)







Infrared collimator is a precise angle measuring instrument, which consists of two parts: a parallel light tube and a telescope; an instrument for precise distance measurement using modulated infrared light. Simultaneous measurement and display of two-dimensional angles;Guarantee equipment quality (flatness, perpendicularity, parallelism, etc.).






Numerical control equipment uses laser interferometer for precision detection and automatic compensation.







The main parts of the equipment are processed by high-precision CNC machining center



Important electrical components in the control cabinet:

All parts use imported electrical components such as Delixi; the main line is equipped with a filter to eliminate interference and ensure the stability of the control system.

 图片17图片18 Servo motor, which has the highest performance of high speed and high precision transmission, the maximum torque of the motor can reach 350%



Automatic table cleaning system

图片20 图片21

Thousand-level high-precision tool setting instrument, repeatability is 0.002mm, IP68 protection level, 3 million contact life, 304 stainless steel cable protection hose.

图片23 图片22

30 Square rail: Larger specifications, larger contact surface, and strong load carrying capacity, which can better ensure the stability of operation during high-speed processing. The mounting surface of the guide rails is all milled by large milling machines, CNC drilling, and high precision.


图片24 图片25

The new towline is divided into four compartments to separate the signal line and power line according to the specifications, which can better prevent signal interference and prevent twisting together during the work of the cable. The cable is made of high-strength shielded wire for longer service life


Intelligent central centralized lubrication system and volumetric shunt system are used to allow the equipment's sliders, rails and other motion systems to be automatically maintained. The oil circuit design can be adjusted to ensure the supply of lubricating oil at each injection point and extend the equipment life

  • Previous:
  • Next: